Rudder pedals

Questions and solutions for flight sim related problems
Post Reply
User avatar
:FI:Bluebell
Post Maniac 2nd Grade
Posts: 1548
Joined: Tue Apr 29, 2003 2:22 pm
Location: Glasgow, Scotland

Rudder pedals

Post by :FI:Bluebell » Tue Nov 06, 2012 12:38 pm

Gents, my CH rudder pedals are becoming a bit twitchy (had them 8 yrs) and re-calibrating them makes no difference, even tried swapping usb ports. Looking to get another set of pedals. Does anyone have the Saitek pedals and if so how are they?




Vin
Oh the things you can find, if you don’t stay behind. – Dr. Seuss
User avatar
:FI:Sneaky_Russian
Post Maniac General
Posts: 3118
Joined: Sun Jan 08, 2006 4:02 am
Location: London SE. Untied Kingdom
Contact:

Re: Rudder pedals

Post by :FI:Sneaky_Russian » Tue Nov 06, 2012 3:14 pm

Saitek pedals are great (- but IMO yoke is shyte)

PS just bagged 6 lever CH quadrant off ebay.
Image

"The marksman hitteth the target partly by pulling, partly by letting go. The boatsman reacheth the landing partly by pulling, partly by letting go." (Egyptian proverb)
User avatar
:FI:Wolfhound
Post Maniac 3rd Grade
Posts: 825
Joined: Tue Apr 28, 2009 7:30 pm
Location: Kildare Town Co. Kildare

Re: Rudder pedals

Post by :FI:Wolfhound » Tue Nov 06, 2012 6:29 pm

Vin
I have saitek pedals , they are fine as i have nothing to compare them too,as these are the only pedals ive used, resistant adjusting and foot size adjustment also i screwed mine to the floor because i noticed the grips on the bottom of the pedals were not the greatest,mind ya that could be the deep shag carpets lol :^o
"i will give thee a dog which i got in ireland. He is huge of limb,and for a follower equal to any man,Moreover, he hath a man's wit and will bark at thine enemy's but never at thy friends. He will see by each man's face whether he be ill or well disposed toward thee. He will give down his life foe thee. (The Icelandic Saga of Nial,c . AD 970-1014

Image
User avatar
:FI:Bluebell
Post Maniac 2nd Grade
Posts: 1548
Joined: Tue Apr 29, 2003 2:22 pm
Location: Glasgow, Scotland

Re: Rudder pedals

Post by :FI:Bluebell » Tue Nov 06, 2012 11:36 pm

Thanks guys.


Vin
Oh the things you can find, if you don’t stay behind. – Dr. Seuss
User avatar
:FI:Sneaky_Russian
Post Maniac General
Posts: 3118
Joined: Sun Jan 08, 2006 4:02 am
Location: London SE. Untied Kingdom
Contact:

Re: Rudder pedals

Post by :FI:Sneaky_Russian » Wed Nov 07, 2012 12:01 am

:FI:Wolfhound wrote:Vin
I have saitek pedals , they are fine as i have nothing to compare them too,as these are the only pedals ive used, resistant adjusting and foot size adjustment also i screwed mine to the floor because i noticed the grips on the bottom of the pedals were not the greatest,mind ya that could be the deep shag carpets lol :^o
Yeah I've screwed mine to a board that butts against the wall , and far end is ramped up with a bit of 4x2 just to give a more comfortable angle.
Image

"The marksman hitteth the target partly by pulling, partly by letting go. The boatsman reacheth the landing partly by pulling, partly by letting go." (Egyptian proverb)
User avatar
:FI:Scott
Post Maniac 2nd Grade
Posts: 1418
Joined: Wed Sep 14, 2005 3:25 pm
Location: N.Yorkshire, U.K

Re: Rudder pedals

Post by :FI:Scott » Wed Nov 07, 2012 3:24 pm

I've had both. The CH set dies after a couple of years and I have had the Saitek ones since. Far more comfortable than the CH's and so far have proven to be very robust.
Candy is dandy but liquor is quicker...
- Willy Wonka.

Image
User avatar
:FI:Armitage
Post Maniac 2nd Grade
Posts: 1240
Joined: Tue Oct 05, 2004 1:28 pm
Location: Athenry, Galway, Ireland

Re: Rudder pedals

Post by :FI:Armitage » Wed Nov 07, 2012 7:36 pm

I have none. :-(
User avatar
:FI:Nellip
Post Maniac 2nd Grade
Posts: 1577
Joined: Wed May 21, 2003 7:09 pm
Location: North Yorkshire - God's own country

Re: Rudder pedals

Post by :FI:Nellip » Wed Nov 07, 2012 11:12 pm

:FI:Armitage wrote:I have none. :-(
Ditto - but what you've never had you never miss, right? :lol:
Olegs stalker

Image
Image

Image
User avatar
:FI:Sacktime
Forum Junky
Posts: 495
Joined: Mon Feb 18, 2008 10:59 pm
Location: Canada

Re: Rudder pedals

Post by :FI:Sacktime » Thu Nov 08, 2012 2:59 am

:FI:Sneaky_Russian wrote:Saitek pedals are great (- but IMO yoke is shyte)

PS just bagged 6 lever CH quadrant off ebay.
I agree.........about the "great" and the "shyte" stuff.
Image
User avatar
:FI:Sneaky_Russian
Post Maniac General
Posts: 3118
Joined: Sun Jan 08, 2006 4:02 am
Location: London SE. Untied Kingdom
Contact:

Re: Rudder pedals

Post by :FI:Sneaky_Russian » Thu Nov 08, 2012 2:21 pm

:FI:Sacktime wrote:
:FI:Sneaky_Russian wrote:Saitek pedals are great (- but IMO yoke is shyte)

PS just bagged 6 lever CH quadrant off ebay.
I agree.........about the "great" and the "shyte" stuff.
Actually - just done a quick mod and replaced the elevator axis spring with a lighter tension one (7.1mm x38.1mm from Rolson 150pc assortment 61298), and it feels a whole lot better. The stock spring increased tension the more it stretched,but using a spring with more coils reduces this effect + lower tension makes the yoke pleasant to use.
Image

"The marksman hitteth the target partly by pulling, partly by letting go. The boatsman reacheth the landing partly by pulling, partly by letting go." (Egyptian proverb)
User avatar
:FI:Bluebell
Post Maniac 2nd Grade
Posts: 1548
Joined: Tue Apr 29, 2003 2:22 pm
Location: Glasgow, Scotland

Re: Rudder pedals

Post by :FI:Bluebell » Thu Nov 15, 2012 6:18 pm

In the end I stripped down the CH pedals and soldered a broken wire and generally gave it a good clean out, and its as good as new.



Vin
Oh the things you can find, if you don’t stay behind. – Dr. Seuss
User avatar
:FI:Sacktime
Forum Junky
Posts: 495
Joined: Mon Feb 18, 2008 10:59 pm
Location: Canada

Re: Rudder pedals

Post by :FI:Sacktime » Sat Nov 17, 2012 3:49 pm

:FI:Ardmore wrote:In the end I stripped down the CH pedals and soldered a broken wire and generally gave it a good clean out, and its as good as new.



Vin
And then again, it sometimes is that simple! =D]
Image
Post Reply